Katana-Glamour-Shot-2-620w

Shown above is our KatanaDTG r3000 PRO system – all new builds are based on the p600!

The KatanaDTG p600 PRO system is a cost-effective way to get into an industrial quality DTG printer, producing some of the highest quality prints in the industry!  Offering all the bells and whistles, while also providing a durable construction quality and industrial drive system – we use high end optical sensors, powerful drive motors and heavy duty parts to deliver a product that can withstand the test of time!

The KatanaDTG p600 PRO system differs from the EXPRESS system in that it features an electronic z-axis control for over 2″ of vertical height control (with independent motor control for both sides), a responsive touch screen control module for the base unit, on-board temperature and humidity monitoring, as well as an accessory port for optional upgrades.

 

GENERAL INFORMATION

  • Footprint Size: 41″ x 27″
  • Printable Area: 12.5″ x 18″

 

FEATURES & BENEFITS

 

PRINT TECHNOLOGY

  • Epson p600 Print Module
  • Advanced Micro-Piezo  Ink-Jet Print Head with Drop on Demand Technology
  • 180 Nozzles x 8 Channels
  • True “OnePass” Dark Garment Print Option
  • Super Fast SDP Dual-CMYK Option for 40% Faster Light Garment Prints
  • Available Print Resolutions:
    • 360 x 720
    • 720 x 360
    • 720 x 720
    • 1440 x 720
    • 1440 x 1440
    • 2880 x 1440

 

CONFIGURATION OPTIONS

  • CMYK + WWWW – This configuration supports traditional dark and light garment printing options, but only has 4-channels dedicated to light garment printing.  Any printer configuration involving white ink will inherently require additional maintenance and troubleshooting to ensure reliable, top quality production. ($9,995 USD)
  • CMYK + CMYK – This configuration supports Dual-CMYK light garment printing at 40% faster speeds than light garments printed with the traditional configuration, relative to each print resolution!  Dual-CMYK configurations require far less maintenance and troubleshooting than printers configured with white ink. ($8,995 USD)

 

INK CHEMISTRY & PRETREATMENT

  • Recommended Dupont Artistri Water Based Inks for DTG Printing
  • Recommended Dupont Pretreat or Image Armor ULTRA Pretreat

 

SUPPORTED OPERATING SYSTEMSIMG_6312

  • Windows XP / Windows 7 / Windows 8 / Windows 10

 

ELECTRICAL REQUIREMENTS

  • (2) Standard 110 AC Power – Print Module / Base

 

SOFTWARE

 

NOTE: Although we have removed the PW sensor during the conversion process, our printers are still able to perform a system Nozzle Check and Print Head Alignment procedure directly through the Epson control panel, as it was intended to be!  No need to fire up the computer for these basis procedures. Compare this with all the DIY-electronics on the market, and see which makes the most sense!